Garmin Watches Trouble Shootings

Troubleshooting a Garmin Watch that will not Charge or Power On

Garmin watches are some of the best around and they are a popular choice for many people. However, sometimes they do have issues and repairs can be a bit tricky to solve.

For the most part, these are pretty good at tracking workouts and logging bike rides, swimming sessions, and run adventures. But if it’s not cooperating as normal, here are some troubleshooting tips that might fix it.

Performing a Soft Reset 

If you are having trouble with your Garmin watch, the first thing to try is a soft reset. Hold down the Power button for at least 15 seconds and then release it. Once the screen goes blank, press it again to turn on your device. If this doesn’t work, try doing this while pressing and holding down other buttons like Light or Back.

This can help sometimes!

If that doesn’t work, try doing a hard reset.

Performing a Hard Reset 

If your Garmin watch is still having problems after the soft reset, you may need to perform a hard reset. Hold down both buttons on the side of your device at the same time (Light and Back) for about 15 seconds. Once the screen goes blank, press it again to turn on your device.

What to do if your watch will not charge?

If your watch will not charge, there are a couple of things to check.

  • The first thing you should do is check the charger. Is it plugged in? If so, try charging from another outlet.
  • If that doesn’t help, try a different cable or adapter.
  • Next, make sure the watch’s contacts are clean and clear of any debris. You can use a cotton swab dipped in rubbing alcohol to gently clean them off if necessary.
  • You can check that the watch is fully charged by placing it in its cradle and pressing the red button on top for about 20 seconds. Make sure the LED light flashes green when you do this.
Garmin Watch charging problems

What to do if your watch will not power on?

If your watch will not power on, the most common reason is that the battery is dead. This can be easily determined by checking the battery level indicator at the bottom of your watch. If it is showing fully charged and there are no signs of water damage or corrosion, then your battery has likely died and you will need to replace it.

If you have a digital watch, there are a few things that can cause it to stop working as well as some troubleshooting tips for fixing them.

  1. The battery is dead or needs recharging.
  2. The watch has stopped working altogether.
  3. A problem with the watch’s charging circuit.
  4. One or more of the buttons are stuck.
  5. The band is caught in a loop, preventing it from being fully opened.
  6. The watch has been dropped while charging and suffered physical damage as a result of this.

Features that Affect Battery Life on Outdoor Wearable 

These are some of the most common features that affect battery life on outdoor wearables.

  1. Current Drain – The amount of current drain from the wearable (across all components) determines how long the device will last before needing to be recharged. This can also be affected by how often you charge your wearable and if it’s being used at full capacity or not.
  2. Display brightness (luminosity) – The display is one of the main factors that affect battery life on wearable devices. A brighter display uses more energy and drains your phone faster.
  3. Battery saving mode – If you don’t want to use all of your phone’s battery, you can switch it into “battery saving mode”. This feature automatically turns off all unnecessary features and services to save power so you can get more time without charging your device.
  4. Battery type – Lithium-ion batteries have better longevity than other types because they can withstand higher temperatures and are smaller in size which means they take up less space within the device itself.
  5. Connectivity – If you have a lot of connectivity options like Wi-Fi or Bluetooth, these will drain your phone’s battery faster than if they weren’t enabled at all.
  6. Location services – GPS location services will drain your phone’s battery faster than if there were no GPS options enabled at all on your phone.
Garmin watches display and on off issues

Replacing the Battery in a Garmin Wearable 

If you’ve ever had a Garmin watch, you know that it can be a great tool for keeping track of your fitness goals but sometimes the battery life on these devices can be less than ideal.

One of the ways to get around this is by replacing the battery yourself. This will give you back some wear and tear on your device and make it last longer.

Step 1: Remove the Back Cover

Unscrew the back cover by turning it counterclockwise until it comes off. Be careful not to lose any screws inside.

Step 2: Remove Battery Pack

Next, remove the battery pack from the watch by lifting it up while pressing down on its bottom edge with your thumb and index finger simultaneously. It should pop out easily if you have removed it correctly.

What to do if your watch is frozen or locked up?

 If your watch is frozen or locked up, you may have forgotten to charge it. Or maybe you put it on the charger before bed and forgot to remove it before going to sleep.

Most of the time, the problem happens when the battery gets discharged and locks up. This can be very frustrating especially if you need to check in on your phone. The good news is that there are ways to fix it.

It is important that you check for any damage on the watch before proceeding with any of these solutions. If there are any scratches on the screen, then you may not be able to access all functions again because they will be damaged as well. You should also try charging your watch with a different charger or USB cable just in case there was something wrong with your original one.

If everything has been checked and tested, then here are some ways to try:

  1. Charge the battery and try again

If the battery is dead, simply plug in your watch and wait for 30 minutes for it to charge again. If the problem persists, try charging it with a different charger or cable (make sure that one isn’t damaged).

  1. Clean the face of your watch

If you’ve tried charging your watch but still can’t get it working properly, then cleaning its face may help. Remove all dirt from the face by cleaning with a soft cloth or towel dampened with warm water and dishwashing liquid. Wipe off any remaining dirt with a dry cloth (do not use alcohol-based cleaners).

  1. Reset your watch

If the above tips have failed to solve your problem, then it might be worth resetting your watch. Most smartwatches have a reset button on their back panel that can be used to restart the device or erase all data from its memory.

How to Improve the Garmin fenix 5 Plus and fenix 5s Plus Battery Life?

The Garmin fenix 5 Plus and the fenix 5s Plus are two of the best activity trackers you can buy today. They have excellent battery life and they’re built to last, so we wanted to show you how to improve their battery life.

The Garmin fenix 5 Plus and fenix 5s Plus both have great battery life, but if you’re using them on a regular basis and need more time between charges then here’s how to make it happen:

  1. Enable Power Saving Mode
    Power Saving Mode is a new feature that comes with the latest firmware update for these devices. This setting will put your device into standby mode when it’s not being used for 30 minutes or more. It will also reduce power consumption by 50% during this time.
  2. Adjust Screen Brightness
    This may seem like an odd suggestion, but lowering your screen brightness can dramatically improve battery life for these devices. Turning down the brightness won’t make your display any less bright so don’t worry about that! You’ll just be able to get more out of each charge.
  3. Turn off features when not in use
    Another thing that impacts battery life is turning off features like GPS tracking and heart rate monitor when not using them. These features drain your watch’s battery faster than other functions, so turning these off whenever possible will help improve its overall performance and increase its lifespan even more!
  4. Control Internal Clock
    You can also change how often your watch runs its internal clock at night (when it has been idle for about two hours). We recommend setting this option to “Never” because this will save on battery life as well as give you more accurate data from your workouts during the day!

Rooting Around In Mind

If you’re still having problems, it’s possible that your Garmin watch has a bug. This happens sometimes and can be frustrating because it means there’s nothing you can do except wait for a fix from Garmin. If this is the case, contact Garmin Support or try searching online for advice on how to fix the problem yourself.

Leave a Comment

Your email address will not be published. Required fields are marked *